ZN series PVC profile extrusion line is mainly used in PVC door &
window profile,wide door board,window board,extrusion of
multi-holes tube for passing through lines(four holes,six
holes,seven holes,nine holes...etc).For different sectional surface
and die head,twin parallel(conical)screw extruder of different
specifications can be chosen together with corresponding vacuum
calibrating table,haul-off unit,cutting unit,tilter....etc.
Capacity of main frame can be optionally chosen from 60-700kg/h.The
haul-off unit has applied unique lift technique of our ZHONGNUO
Co.Stable work,good reliability and large pulling force.Vacuum
setting has applied special enlarged vortex cooling system which is
good for cooling and calibrating so as to meet demand of high speed
extrusion.Movement speed and drawing speed of cutting machine keep
synchronous.All movements are controlled by imported PLC,the design
is reasonable,the operation is stable,also it can conduct automatic
cutting with fixed length.Powder & dust suction device can be
provided.With different die tooling,the tilter platform can choose
such specifications as 4-meter,6-meter,8-meter,11-rneter...ete.With
twin parallel screw extruder,it is particularly suitable for high
speed extruding of profile material.
Main Technical Parameters
Extruder model | SJZ55/110 | SJZ65/132 | SJZ80/156 | SJZ92/188 |
Main motor power(kw) | 22 | 30 | 55 | 110 |
Down-stream equipment model | YF240s | YF240A | YF300A | YF600 | YF900 | YF1200 |
|
